TERMS AND CONDITIONS
INTRODUCTION
Your Acceptance of Contract Terms of this Agreement
Unless otherwise expressly agreed in a writing signed by you and an authorized representative of Omachron Plastics Inc. (“Omachron Plastics,” “we” or “us”), these terms and conditions of use and sale and the privacy policy, as currently in effect and as modified by us from time to time (the “Omachron Plastics Standard Terms”), and the provisions included in any documentation you receive from us relating to your purchase of the products we sell (“Products”), including but not limited to any quotation, order acknowledgment, packing list or invoice which we provide, constitute the exclusive and complete agreement between you and Omachron Plastics (collectively, the “Terms and Conditions"), with respect to (i) your use of our website at plastiblocks.com, any of our mobile applications, any of our e-commerce applications, or our printed catalog (collectively, the “Omachron Plastics Properties”), and (ii) your purchase and use of the Products. By using any of the Omachron Plastics Properties, purchasing any Products from us, or by clicking the “I agree” button on our website, any of our e-commerce applications or any of our mobile applications, you acknowledge that you have read, understood and agree to be bound by the Terms and Conditions. In the event of any conflict between the provisions of the Omachron Plastics Standard Terms and the provisions set forth in any documentation you receive from us relating to your purchase of Products, the provisions of the Omachron Plastics Standard Terms shall prevail. In addition, if you use any of our e-commerce or mobile applications, you are also subject to the end user license agreement associated with the e-commerce or mobile application, but if and to the extent that there is any conflict between the Terms and Conditions and the end user license agreement for an e-commerce or mobile application, the Terms and Conditions shall prevail. Our acceptance of any order submitted by you is expressly subject to your acceptance of the Terms and Conditions, which may be evidenced solely by your acceptance of any Products ordered. Any additional, different or conflicting terms in any document or communication you submit to us are rejected and shall have no effect unless we agree to them in a writing signed and sent to you by our authorized representative. The Terms and Conditions supersede, override and exclude all prior or contemporaneous oral or written communications.
Changes in Terms and Conditions of this Agreement
The Omachron Plastics Standard Terms are effective as of the “Terms and Conditions Version Date” set forth below. We reserve the right to change the Omachron Plastics Standard Terms at any time by providing notice to you. That notice will be given by one or more of the following: (i) providing you with an electronic notification through our website, by e-mail or other means of electronic communication or through any of our e-commerce or mobile applications, or (ii) making a revision to the Omachron Plastics Standard Terms and changing the version date shown below. By clicking the “I agree” button in connection with an electronic notification of a change, by using any of the Omachron Plastics Properties, or by purchasing a Product from and after the new version date, you signify your acceptance of the revised Omachron Plastics Standard Terms. The Omachron Plastics Standard Terms shall not be changed, supplemented or interpreted by any course of dealing between the parties and they shall not be interpreted against us because we have drafted them.
TERMS AND CONDITIONS OF USE
Licensed Use
Ownership of Content. All literary, pictorial, graphic, derivative and other works, compilations, information and other content in or on the Omachron Plastics Properties, including but not limited to drawings, photographs, images, screen shots, text, digitally downloadable files, trademarks, logos, product, service and program names, slogans, trade dress, and the compilation of the foregoing (the “Content”), and the design, “look and feel” and arrangement of the Content, other than any public domain materials, are (i) owned or controlled by or licensed to Omachron Plastics, and (ii) protected in the United States and internationally under trademark, copyright, and other intellectual property laws. All title, ownership and other rights in and to the Omachron Plastics Properties and the Content are exclusively owned or licensed from a third party by Omachron Plastics.
If you are a trademark or copyright owner and you believe that your trademark or copyright rights have been violated, please go to our Takedown Policy and follow the relevant instructions.
Trademarks and Copyrights
Plasti-Block® and Omachron® are trademarks of Omachron Intellectual Property Inc. and used under license by Omachron Plastics. Except as expressly permitted by us, nothing in the Terms and Conditions confers any license in any property right, including without limitation any right in any trademark or copyright of Omachron Plastics, Omachron Intellectual Property Inc., or any third party.
Grant of Limited Use License. Omachron Plastics grants you a limited, nonexclusive, non-transferable and revocable license to use the Omachron Plastics Properties only in accordance with and for the purposes set forth in the Terms and Conditions (the “Limited Use License”). Omachron Plastics retains the right to terminate or limit your Limited Use License, and your access to the Omachron Plastics Properties and to any Content, for any reason and at any time. Except as otherwise expressly permitted in the Terms and Conditions with respect to CAD Models, or agreed to in writing by an authorized representative of Omachron Plastics, the Omachron Plastics Properties are only for your use in deciding whether to purchase Products from us and in purchasing Products from us. You agree that you will impose only that load on Omachron Plastics's servers that is necessary for your use in deciding whether to purchase Products from us and in purchasing Products from us.
Prohibited Uses of the Omachron Plastics. Properties
Any unauthorized use, change of information or interference with the availability of, access to or proper working of any part or feature of the Omachron Plastics Properties or their security measures is prohibited. Without limiting the foregoing, you agree that you will not, directly or indirectly through any third party, engage in any of the following activities with respect to the Omachron Plastics Properties or the Content, except as otherwise expressly permitted in the Terms and Conditions with respect to CAD Models, or agreed to in writing by an authorized representative of Omachron Plastics:
(i)copy, mirror, archive, intercept or redirect any Content;
(ii) redistribute, reproduce, make a derivative work from or commercially exploit the Content in any manner;
(iii) page or screen scrape, web harvest, or use any robot, spider, indexing agent or other automatic device, process or means to access the Omachron Plastics Properties for any purpose, including extracting data from, monitoring or copying the Content;
(iv) use the Omachron Plastics Properties in a manner that could disable, overburden, damage or impair them or interfere with another party’s use of them;
(v) use any device, software or routine that interferes with the proper working of the Omachron Plastics Properties;
(vi) introduce to the Omachron Plastics Properties any virus, trojan horse, worm, logic bomb or other material which is malicious or technologically harmful;
(vii) attempt to gain unauthorized access to, interfere with, damage or disrupt any parts or features of the Omachron Plastics Properties or the Content, the servers on which the Omachron Plastics Properties and Content is stored, or any server, computer or database connected to the Omachron Plastics Properties or operated by us;
(viii) use a denial-of-service attack or a distributed denial-of-service attack against any of the Omachron Plastics Properties;
(ix) reverse engineer or attempt to extract the source code of any software that comprises any part of the Omachron Plastics Properties or the Content;
(x) display or use any Content for any commercial purpose in any publications, audiovisual works, public performances, or on websites or other applications, including but not limited to in connection with products other than our Products, in any other manner likely to cause confusion, to disparage or discredit us or our licensors, to dilute the strength of the intellectual property owned by us or our licensors, or to otherwise infringe the intellectual property rights of Omachron Plastics or any third party;
(xi) frame or use framing techniques to enclose any trademark, logo, intellectual property or other proprietary information (including images, text, page layout or form) of Omachron Plastics without our express written consent;
(xii) use any metatag or any other “hidden text” utilizing our name or trademarks without our express written consent; or
(xiii) use any technology or other means to hide your identity.
Use of CAD Models
The CAD models on the Omachron Plastics Properties (“CAD Models”) are being made available to help you decide whether to purchase Products from us. You may download the CAD Models and share them with others in your organization or with third parties acting on behalf of or rendering services to you or your organization (including your data center or cloud service providers), but only for purposes of deciding whether to purchase Products from us or in order to develop design drawings and prototypes for use by you or your organization in connection with a decision regarding whether to purchase Products from us. You shall not use the CAD Models to engage in 3D printing or other fabrication of the objects depicted in the CAD Models for any other purpose, and you shall not otherwise redistribute or make available the CAD Models (or any design drawings or prototypes that incorporate them) to any third parties, including third parties in the business of selling products similar to the Products.
The CAD Models do not contain any technical information other than what is readily observable, specified by industry standards or provided to us by our suppliers. The dimensions and other technical specifications of Products may vary from those shown in the CAD Models, due among other reasons to tolerances associated with manufacturing processes. Manufacturing tolerance information is considered proprietary by many of our suppliers and is not always provided to us. Thus tolerance information may not be reflected in the CAD Models. You acknowledge and agree as follows: (i) your use of the CAD Models is at your own risk and you are solely responsible for any use you make or permit others to make of the CAD Models; (ii) Omachron Plastics makes no representation or warranty (express or implied) with respect to the CAD Models, including but not limited to the accuracy or completeness of Product dimensions or any other technical specifications contained in or accompanying the CAD Models, non-infringement of third party rights, and quality, suitability, fitness for purpose or title; (iii) Omachron Plastics may terminate or limit your access to the CAD Models for any reason at any time; and (iv) to the fullest extent permitted by law, you shall indemnify us and hold us harmless from and against any and all liabilities, losses, damages, costs and other expenses (including court costs and reasonable attorneys’ fees) resulting from claims asserted by you or others as a result of your use of the CAD Models.
User Content
Submission of User Content to Us
We are pleased to hear from our customers. We may from time to time seek feedback from our customers and other users of the Omachron Plastics Properties and we may enable them to submit, post or upload reviews, comments, suggestions, messages, photographs, videos, CAD files and other content (collectively, “User Content”).
Disclaimer of Liability for User Content
We do not control, endorse or verify any User Content and we make no representation or warranty concerning its authenticity, integrity or accuracy. Reliance on or use of any User Content is solely at your own risk. To the fullest extent permitted by law, we are not responsible or liable for any User Content or for any claims, damages or losses resulting from the use or appearance of any User Content on the Omachron Plastics Properties.This site may enable you to view, access, link to, and use third party properties and content, which are not owned or controlled by Omachron Plastics, such as other users' User Submissions ("Third Party Materials"), and your interaction with Third Party Materials may be subject to third party terms and policies, which are your responsibility to review. Your interaction with and reliance on any Third Party Materials is at your sole discretion and risk. You are solely responsible and liable for your User Submissions. Omachron Plastics has no obligation to accept, display, review, or maintain any of your User Submissions, or enforce the Cross License or any of your intellectual property rights in and to any User Submission. Omachron Plastics may, for any reason and at any time, and without notice to you, edit, replace and/or delete your User Submissions, such as, but not limited to, if Omachron Plastics: (a) determines that you are in breach of any provision of this Agreement or have violated (or are suspected by Omachron Plastics of violating) any applicable law; and/or (b) deems it helpful or reasonably necessary to comply with any applicable law, legal process, or governmental request, to enforce this Agreement (including investigations of potential breaches thereof), detect, prevent, or otherwise address fraud or security issues, or protect against harm to the rights, property or safety of Omachron Plastics, its users, yourself or the public.
User Content You Submit
You are solely responsible for all User Content you submit to us. You agree that you will not submit to us any User Content that (i) infringes or otherwise violates the rights of others, including patents, copyrights, trademarks, trade secrets, publicity or privacy rights, (ii) violates any local, state, national, or regional laws of the United States or any other jurisdiction, (iii) is unlawful, obscene, derogatory, threatening, harassing, hateful, racist, defamatory or otherwise objectionable, (iv) uses a false email address, impersonates any person or entity or is otherwise misleading as to its origin, (v) contains charity requests, petitions for signatures, chain letters or letters relating to pyramid schemes, advertising or solicitations for funds, political campaigning, mass mailings, any form of unsolicited commercial email or "spam," (regardless of whether the email itself complies with the requirements of federal or state law for sending commercial email) or offering or disseminating fraudulent goods, services, schemes or promotions, or (v) contains viruses or corrupted files that may adversely affect the Content or the operation of the Omachron Plastics Properties. You further represent and warrant that you have, and will maintain during and after any termination of this Agreement, all licenses, consents, permissions and approvals required to grant the User Submission License and the Cross License. We reserve the right to remove or edit any User Content and to terminate or suspend your account at any time and without notice.
Your Grant of a License and Other Rights to User Content You Submit
By submitting User Content to us, you grant to Omachron Plastics and all Omachron Plastics’ Affiliates a non-exclusive, royalty-free, sub-licensable, perpetual, fully-paid, worldwide license (i) to use, reproduce, modify, publish, perform, create derivative works from, distribute and display such User Content in any and all media or distribution methods now known or hereinafter developed, and you hereby irrevocably waive all “moral rights” (including without limitation the rights of paternity, attribution and integrity) with respect to our use of that User Content, and (ii) to use the names, images and likenesses that you submit to us in connection with that User Content(the "User Submission License"). You also grant each user of this site a worldwide, non-exclusive, royalty-free, fully-paid, perpetual, irrevocable, non-sublicensable, non-assignable, and non-transferable license to use, reproduce, copy, modify, adapt, arrange, translate, and create derivative works of such User Submissions for such user's own benefit and non-commercial, internal use (the "Cross License"). If and to the extent User Content that you submit to us contains ideas, suggestions, documents, proposals or other feedback relating to us and our business (“Suggestions”), you acknowledge and agree as follows: (i) your Suggestions do not contain confidential or proprietary information; (ii) we are not obligated to keep your Suggestions confidential and we may use or disclose them in any media or distribution methods now known or hereinafter developed,worldwide; (iii) we receive submissions from many parties that are similar to the Suggestions, or we may have ideas, concepts or processes similar to the Suggestions already under consideration or in development; (iv) your Suggestions shall be deemed the property of Omachron Plastics, which we will be free (but not required) to evaluate, develop and exploit at our discretion, without any obligation to compensate you or to credit you, and without any other obligation to you; and (v) you hereby assign all right, title and interest in the Suggestions, and any inventions, works, or other subject matter or rights contained in them, to Omachron Plastics. You agree that you will have no claim or other recourse against Omachron Plastics for infringement of any proprietary right with respect to your Suggestions.
Consent to Electronic Communication
When you use the Omachron Plastics Properties to purchase products, request information or otherwise solicit an electronic communication from us, or to send emails, text messages or other electronic communications to us for any of these purposes, you consent to receive electronic communications from us in response. You may withdraw your consent to receive electronic communications from us at any time by writing to us at "Attn: support@plastiblocks.com. If you fail to provide your consent or if you withdraw your consent to receive communications electronically, we reserve the right to either deny your application for an account, restrict or deactivate your account, close your account and any sub-account, or charge you additional fees for paper copies. We may communicate electronically with you in a variety of ways, including by email, text message, in-app push notices, posting notices and messages on the Omachron Plastics Properties or by other means. You agree that all notices, disclosures, agreements and other communications that we provide to you electronically satisfy any legal requirement that those communications be in writing. You agree that we may preserve any communication by you to us through any of the Omachron Plastics Properties and that we may disclose the data contained in any communication from you if we are required to do so by law or if we determine that preserving or disclosing that data is necessary to (i) comply with legal process, (ii) enforce the Terms and Conditions, (iii) respond to claims that the data you submitted violates the rights of others, or (iv) protect the rights, property or personal safety of Omachron Plastics, our employees, users of the Omachron Plastics Properties or the public.
Links and Other Third-Party Applications
No Endorsement by Us of Third-Party Websites
The existence on third-party websites or applications of hypertext links to any of the Omachron Plastics Properties does not imply or signify any relationship, endorsement or other connection between Omachron Plastics and the owner or operator of the website or application containing the links. Omachron Plastics is not responsible for inaccuracies in information or for any representations and express or implied warranties, including those of fitness for purpose or merchantability, which may be contained on or implied from any third-party websites or applications containing hyperlinks to plastiblocks.com. Omachron Plastics does not authorize any other parties to make representations or warranties on our behalf.
Limited Permission to Link to Our Homepage
You may link to the homepage of plastiblocks.com or omachronplastics.com only if (i) the link or the manner of linking does not damage or take advantage of our reputation, (ii) you do not by such linkage suggest that we approve, endorse or are in any other way associated with your activities, products or services, and (iii) you immediately remove any links to plastiblocks.com or omachronplastics.com at our request.
Disclaimers Relating to Third-Party Applications Included by Us
The Omachron Plastics Properties may include third-party technology, software, applications and links to other websites and resources provided by third parties. Any such links are provided for your convenience only. We do not have any control over the content of those third-party websites or resources. You therefore acknowledge and agree as follows: (i) we are not responsible for the practices or policies of third parties or for any loss or damage that may arise from your use of any third-party technology, services, software or applications or any linked third-party website or resource; and (ii) if you use any third-party technology, services or software or access any website or resource linked to the Omachron Plastics Properties, you do so at your own risk and subject to the terms and conditions of use of any such third-party technologies, websites or resources.
Disclaimer of Warranties Relating to Use
THE OMACHRON PLASTICS PROPERTIES ARE PROVIDED ON AN “AS-IS” AND “AS-AVAILABLE” BASIS AND YOUR USE OF THEM IS AT YOUR OWN RISK. ACCORDINGLY, THE OMACHRON PLASTICS PROPERTIES AND ALL CONTENT PROVIDED THEREIN ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE AND NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE OMACHRON PLASTICS PROPERTIES OR ANY CONTENT OR TECHNOLOGY INCLUDED IN THEM, INCLUDING WITHOUT LIMITATION (i) WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OF THIRD-PARTY RIGHTS, ACCURACY, COMPLETENESS, QUALITY, SUITABILITY, TITLE AND FITNESS FOR A PARTICULAR PURPOSE, AND (ii) WARRANTIES THAT THE OMACHRON PLASTICS PROPERTIES WILL BE UNINTERRUPTED, TIMELY, SECURE OR ERROR-FREE. YOU THEREFORE ACKNOWLEDGE AND AGREE THAT YOU ARE SOLELY RESPONSIBLE FOR ADEQUATE PROTECTION AND BACKUP OF YOUR DATA AND/OR EQUIPMENT IN CONNECTION WITH YOUR USE OF THE OMACHRON PLASTICS PROPERTIES. YOU SHALL HOLD OMACHRON PLASTICS HARMLESS FROM AND YOU SHALL NOT SUE OMACHRON PLASTICS FOR ANY CLAIMS BASED ON YOUR USE OF OR INABILITY TO USE THE OMACHRON PLASTICS PROPERTIES OR THE CONTENT.
Limitation of Liability Relating to Use
TO THE FULLEST EXTENT PERMITTED BY LAW, OMACHRON PLASTICS AND ITS EMPLOYEES, AGENTS, OFFICERS OR DIRECTORS WILL NOT BE LIABLE IN CONTRACT, WARRANTY, TORT OR UNDER ANY OTHER LEGAL THEORY FOR DAMAGES OF ANY KIND, INCLUDING DIRECT, INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, GOODWILL, LOSS OF DATA OR ANY OTHER LOSSES ARISING FROM YOUR USE OF OR INABILITY TO USE THE OMACHRON PLASTICS PROPERTIES OR THE CONTENT, OR FOR YOUR RELIANCE ON THE CONTENT IN THE OMACHRON PLASTICS PROPERTIES, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Indemnification Relating to Use
As a condition to your use of the Omachron Plastics Properties, to the fullest extent permitted by law, you agree to defend, indemnify and hold harmless Omachron Plastics and its respective officers, directors, employees, agents, contractors, vendors and suppliers from and against any liabilities, losses, damages, costs and other expenses (including court costs and reasonable attorneys’ fees) arising or resulting directly or indirectly out of (i) any breach by you of the Terms and Conditions, (ii) your use of the Omachron Plastics Properties, (iii) User Content submitted by you, and (iv) your use of the CAD Models.
Limitations on International Users
Export Control Laws. Certain Content that may be downloaded by you or is otherwise made available on the Omachron Plastics Properties may be subject to United States export control laws. These laws prohibit the export of certain information, software and other technology to certain restricted localities, persons and entities. You agree and acknowledge that no Content, software or other technology may be used, downloaded or exported from the Omachron Plastics Properties (i) in or into any country against which the United States maintains a trade embargo, (ii) by or to a person or entity designated on the U.S. Treasury Department’s List of Specially Designated Nationals or the U.S. Commerce Department’s Denied Persons List or Entity List, or (iii) otherwise in violation of any applicable United States export control law.
Compliance with Laws of Other Countries. Omachron Plastics operates the Omachron Plastics Properties from the United States and/or Canada and does not warrant or represent that they are appropriate for use in or otherwise comply with the laws of any jurisdiction outside the jurisdiction in which Omachron Plastic Properties operates. You acknowledge and agree that you are solely responsible for ensuring that your use of the Omachron Plastics Properties is lawful in any jurisdiction in which you use them.
TERMS AND CONDITIONS OF SALE
Prices and Payment Terms
Published prices don't include taxes, duties, brokerage or shipping costs, and they may be changed without notice. Information about shipping charges will be presented at checkout before you place your order or after your order is received, but before your credit card is charged. All payments must be in the currency indicated, which may be U.S. Dollars, when the order is placed. Open accounts may be available on terms approved by us. Payment terms on open accounts are net 30 days, less two percent for payment within 10 days of shipment or pick-up of the Products. Visa, MasterCard and American Express will generally be accepted for orders, but credit card arrangements are subject to change. By providing a credit card or other payment method accepted by Omachron Plastics, you represent and warrant that you are authorized to use the designated payment method, and you authorize us (or our third-party payment processor) to charge your payment method for the total amount of your order (including any applicable taxes, handling and shipping costs, and other charges detailed at checkout). If the payment method you provide cannot be verified, is invalid or is otherwise not acceptable, your order may be suspended or cancelled. You must resolve any problem we encounter in order to proceed with your order.
Right to Correct, Reject or Cancel Orders, and Availability
We reserve the right to correct typographic errors and reject or cancel all or part of an order because applicable law prevents the sale of the Products in your area or for any other reason. We reserve the right to discontinue offering certain Products without prior notice. All Products are subject to availability.
Other Charges
In addition to the published price, we may charge you for shipping, freight, taxes and all other expenses that we incur in connection with the shipping of your order.
Taxes and Governmental Charges
You are responsible for all applicable national, state, provincial and local sales and use taxes, value added taxes, duties, tariffs and other governmental fees which may be imposed in connection with your purchase of Products from us. When we collect taxes and other governmental fees from you, the amount collected will be stated separately on the invoice. If you are claiming exemption from sales tax, you are responsible for providing a valid sales tax exemption certificate and you agree that you will not claim a sales tax exemption for purchases that do not qualify as exempt. If your claim of exemption for any purchase is deemed invalid by the taxing jurisdiction, you will upon request reimburse us for any and all taxes due on that purchase from us. If any Product which you purchase for resale is subsequently used by you, you will pay the use tax directly to the taxing authority if required by law. Please reference the appropriate department in your State or Province, if applicable.
Delivery, Title and Risk of Loss
Delivery
Delivery occurs FOB Omachron Plastics’s warehouse when the Product is tendered to the carrier or is picked up by the customer.
Title and Risk of Loss. Title and risk of loss pass to the customer at Omachron Plastics’s warehouse when the Product is tendered to the carrier or is picked up by the customer. For sales as to which we have agreed in the documentation you receive from us relating to your purchase of Products to prepay the shipping charges, we may elect at our sole option to replace or refund the purchase price of a Product damaged in transit. In no event will Omachron Plastics be liable for any loss, damage, or penalty resulting from any delay in shipment or delivery.
Product Returns
Non-Defective Product
To return a non-defective Product, a return authorization must be requested from our customer service department within 30 days of your purchase date. To request a return authorization and to receive return instructions, please contact Customer Service. We will only accept a return if a return authorization number has been issued and the returned Product is in perfect resalable condition. We do not take title to returned Products until the Product arrives at our facility. You will be given credit, minus a restocking fee of 15% and the costs for the return shipping. We reserve the right to reject returns of Products used or damaged by the customer or designated as non-cancellable or non-returnable. Shipping and handling charges, and taxes paid (such as state, customs, or VAT) are not refundable and you will not receive a credit for any shipping and handling charges, or for any taxes paid. If you return Product to Omachron Plastics without a return authorization from Omachron Plastics, Omachron Plastics retains the right to either refuse acceptance of such return or charge you a restocking fee of 15% of the original price of the returned Product(s).
Defective Product
To return a defective Product, a return authorization must be requested from our customer service department within 30 days of your purchase date. To request a return authorization and to receive return instructions, please contact Customer Service. You may elect to receive a replacement Product or a credit for the returned defective Product. Regardless of your election, Omachron Plastics reserves the right to provide you a credit and not a replacement Product. You must return the defective Product to Omachron Plastics to receive a credit or replacement Product. The return authorization number must be included along with your returned Product and we will only accept a return if a return authorization number has been issued. Omachron Plastics will be responsible for the shipping charges for the return of any defective Product. You assume the risk of loss or damage to the returned Product(s) while in transit back to Omachron Plastics. We do not take title to returned Products until the Products arrive at our facility. You will be given credit or a replacement Product in accordance with your election upon our receipt of the returned defective Product and our determination that the returned Product is defective. If we determine that the returned Product is not defective, then, if you have an open account your account may be charged, or if you do not have an open account the credit card used to make the purchase may be charged, for the return shipping charges plus a 15% restocking fee. We reserve the right to reject returns of Products used or damaged by the customer or designated as non-cancellable or non-returnable. Shipping and handling charges, and taxes paid (such as state, customs, or VAT) are not refundable and you will not receive a credit for any shipping and handling charges, or for any taxes paid.
Limited Product Warranty
Our only warranty or other obligation and your only remedy against us with respect to our Products is for us to replace any Product which is defective in material or workmanship when sold and which you return to us. ALL OTHER WARRANTIES AND REMEDIES WITH RESPECT TO THE PRODUCTS WE SELL, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE, ARE DISCLAIMED. SOME JURISDICTIONS DO NOT ALLOW EXCLUSIONS OR LIMITATIONS OF IMPLIED WARRANTIES, SO THE FOREGOING LIMITATION MAY NOT APPLY TO YOU AND YOU MAY HAVE ADDITIONAL RIGHTS. HOWEVER, YOU ACKNOWLEDGE AND AGREE THAT IN ALL JURISDICTIONS WE DISCLAIM IMPLIED WARRANTIES TO THE FULLEST EXTENT PERMITTED BY LAW.
Limitation of Liability and Remedies Concerning Products
TO THE FULLEST EXTENT PERMITTED BY LAW, OMACHRON PLASTICS AND ITS EMPLOYEES, AGENTS, OFFICERS OR DIRECTORS WILL NOT BE LIABLE IN CONTRACT, WARRANTY, TORT OR OTHERWISE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, GOODWILL, BUSINESS INTERRUPTION OR ANY OTHER LOSSES (OTHER THAN THE COST OF THE PRODUCT OR ITS REPLACEMENT OR REPAIR) THAT ARISE DIRECTLY OR INDIRECTLY OUT OF YOUR PURCHASE OF ANY PRODUCT FROM US, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE FULLEST EXTENT PERMITTED BY LAW, WE ALSO DISCLAIM ANY LIABILITY FOR CLAIMS ARISING OUT OF THE MISUSE, IMPROPER SELECTION, FAULTY REPAIR OR IMPROPER MODIFICATION OF A PRODUCT. TO THE FULLEST EXTENT PERMITTED BY LAW, YOUR ONLY RECOURSE AND EXCLUSIVE REMEDY WITH RESPECT TO ANY CLAIMS RELATED TO THE PRODUCTS WE SELL IS THE RIGHT TO RETURN THE PRODUCTS AND OBTAIN AT OUR OPTION A REFUND OF THE PURCHASE PRICE OR REPLACEMENT OF THE PRODUCT. TO THE FULLEST EXTENT PERMITTED BY LAW, OUR TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION (WHETHER IN CONTRACT, WARRANTY, TORT OR OTHERWISE) SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT THAT GIVES RISE TO THE CLAIM. TO THE FULLEST EXTENT PERMITTED BY LAW, ANY CLAIM OR ACTION BROUGHT AGAINST US ARISING OUT OF ANY PRODUCT WE SELL TO YOU MUST BE BROUGHT WITHIN ONE YEAR AFTER THE PRODUCT HAS BEEN DELIVERED TO YOU.
Limits on Use of and Reliance on Information We Make Available to You
Warnings, Information and Instructions
The dimensions and other technical specifications of Products may vary from those shown in the CAD Models due to tolerances associated with manufacturing processes. Because manufacturing tolerance information is considered proprietary by many manufacturers and is not provided to us, tolerance information may not be reflected in the CAD Models. WE MAKE NO REPRESENTATION OR WARRANTY (EXPRESS OR IMPLIED) CONCERNING AND, TO THE FULLEST EXTENT PERMITTED BY LAW, WE HAVE NO LIABILITY FOR THE ACCURACY OR COMPLETENESS OF ANY WARNINGS, INFORMATION (INCLUDING BUT NOT LIMITED TO PRODUCT DIMENSIONS OR ANY OTHER TECHNICAL SPECIFICATIONS INCLUDED IN THE CAD MODELS) OR INSTRUCTIONS PROVIDED BY OUR SUPPLIERS.
Your Responsibilities to Us
Assumption of Risk for Product Information
Omachron Plastics is a reseller of certain Products manufactured by others. Information about the Products resold by the Omachron Plastics Properties is provided by or is dependent upon information provided by our suppliers (“Product Information”). WE MAKE NO REPRESENTATION OR WARRANTY (EXPRESS OR IMPLIED) CONCERNING AND, TO THE FULLEST EXTENT PERMITTED BY LAW, WE HAVE NO LIABILITY FOR THE ACCURACY OR COMPLETENESS OF THE PRODUCT INFORMATION. You assume the risk that the Product Information may be incomplete, inaccurate or out of date. We may add, change, discontinue, remove or suspend any of the Product Information or other information included in the Content at any time, without notice or liability. We reserve the right to correct any publishing errors in the Content, including pricing errors.
Compliance with Laws
WE MAKE NO REPRESENTATION OR WARRANTY (EXPRESS OR IMPLIED) THAT PRODUCTS OFFERED FOR SALE BY US COMPLY WITH ANY LAWS, CODES OR REGULATIONS GOVERNING THEIR PURCHASE, INSTALLATION, USE, HANDLING, STORAGE, RESALE, TRANSPORTATION, DISPOSAL, EXPORT OR IMPORT, THAT THEY ARE AVAILABLE FOR SALE OR USE IN YOUR JURISDICTION, OR THAT THEY ARE APPROPRIATE OR SUITABLE FOR YOUR PURPOSES OR USE. You are solely responsible for ensuring your compliance, and that of any third party to whom you resell the Products, with all applicable laws governing purchase, installation, use, handling, storage, resale, transportation, disposal, export and import of the Products you purchase from us.
Your Representations and Warranties
You are responsible for familiarizing yourself with all other available information about the Products prior to your purchase and use of them to determine their suitability for and any limitations on your intended use. In connection with any purchase of Products from us, you warrant, represent, acknowledge and agree as follows: (i) the purchase, installation, use, handling, storage, resale, transportation, disposal, export or import of the Products by you and any third party to whom you resell them is and will be in compliance with all applicable laws and regulations and will conform to generally recognized industry and professional standards; (ii) you and any third party to whom you resell the Products are or will be knowledgeable concerning the laws and other practices relating to the safe and lawful purchase, installation, use, resale, handling, storage, transportation, and disposal of the Products; (iii) you have used your own skill and judgment in selecting and you are solely responsible for the determination and selection of suitable Products for your contemplated use and the use contemplated by any third party to whom you resell the products; (iv) you have the legal right and are authorized to purchase the Products; (v) you understand any and all hazards associated with the storage, use, handling and transportation of the Products; and (vi) you are solely responsible for protecting and/or warning all parties who may be exposed to those hazards as a result of your use or resale of the Products.
Your Indemnification of Us
Your purchase, use and resale of the Products is at your own risk. To the fullest extent permitted by law, except to the extent caused by our negligence or willful misconduct, you agree to defend, indemnify and hold harmless Omachron Plastics and its respective officers, directors, employees, agents, contractors, vendors and suppliers from and against any liabilities, losses, damages, costs and other expenses (including court costs and reasonable attorneys’ fees) arising or resulting (directly or indirectly) out of your (i) breach of any of the Terms and Conditions, (ii) negligence, misuse or other wrongful conduct related to a Product, or (iii) violation of any applicable law related to any Product. To the extent they are inconsistent with the U.S. federal Anti-Deficiency Act, the indemnification provisions in the Terms and Conditions will not apply to any sale made by us to a U.S. federal government agency to which the Anti-Deficiency Act applies.
Government Procurement
Items sold by us may not meet certain government procurement requirements (such as those imposed by the Buy American Act). Upon request, we will provide you with origin information. If you require other information or have other special needs, please contact our Sales Department.
Electronic Commerce / EDI
If you purchase Products through our website, or by email, facsimile or an electronic data interchange or EDI system (collectively, “e-commerce”), you agree that (i) any contract of sale resulting from an e-commerce transaction is legally binding and enforceable, notwithstanding the provisions of any law relating to whether agreements must be in writing or signed by the parties to be bound thereby; and (ii) copies of our e-commerce records are admissible in any legal proceeding under the business records exception to the hearsay rule, the best evidence rule or any other rule of evidence, notwithstanding that such records were not originated or maintained in documentary form. As provided in the Uniform Commercial Code, we adopt as our signature on e-commerce communications the electronic identification of Omachron Plastics affixed to or contained in each electronic record transmitted in connection with a transmission. In the event of a dispute, the business records maintained by us regarding your e-commerce purchases with us shall be deemed to be the governing records for purposes of establishing the terms of those purchases.
Additional Terms Applicable to the Export of Products
Export Controls
Our Products may be subject to U.S. and Canadian export control laws and regulations. You acknowledge and agree that you are responsible for and shall comply with all laws, regulations and orders of the United States and Canada applicable to the export of Products you purchase from us. Without limiting the foregoing, you represent and warrant as follows: (i) you are not designated on or associated with any party named on any of the restricted parties lists published by the U.S. government, including the Denied Persons List, the Entity List, the Unverified List of the Bureau of Industry and Security of the Department of Commerce, or the Specially Designated Nationals and Blocked Persons List of the Office of Foreign Assets Control of the Treasury Department; (ii) you shall not engage in the export, reexport, diversion, transfer or other disposition of any Product in violation of any laws of the United States, including but not limited to laws administered by the Treasury Department and the Department of Commerce pursuant to which the United States maintains trade embargoes and sanctions against certain countries; (iii) you are purchasing the Products to be exported from the United States and imported to the destination identified in the documentation relating to your purchase of Products in compliance with the laws of the United States and that destination; (iv) you understand and acknowledge that a license or other authorization may be required from the Bureau of Industry and Security, the Office of Foreign Assets Control or other U.S. government agency before exporting or reexporting Products from the United States; (v) unless otherwise expressly agreed by us in the documentation you receive from us relating to your purchase of Products, you are responsible for obtaining and paying for any licenses, permits or other authorizations required for exporting or reexporting our Products; and (vi) all other costs associated with exporting the Products shall be your responsibility.
Your Import of Products
We do not serve as the importer of Products into any country. In all other cases, when the Products you purchase from us are imported into another country, you are solely responsible for (i) compliance with all laws governing that country’s importation process, (ii) obtaining and paying for all necessary licenses, permits, customs clearances and all other authorizations, and (iii) paying all applicable duties, tariffs and other taxes and government charges imposed by that country upon import, and any brokerage, storage, any other fees or costs associated with the import of the Products. You must comply with all domestic and international import laws and regulations that apply in connection with the Products. These laws may include restrictions on destinations, users, and end use.
Acknowledgement of Independent Contractor Status
In exporting the Products from the United States, importing them into another country, or reselling them following your purchase from us, you acknowledge that you are an independent contractor and that you shall not hold yourself out as an agent or otherwise cause others to believe that you are authorized to act on behalf of Omachron Plastics.
Term
This Agreement commences on the Effective Date and will remain in full force and effect until terminated by either party in accordance herewith (the "Term").
Termination
Omachron Plastics reserves the right to immediately terminate this Agreement, or otherwise modify, suspend or discontinue your access to and use of this site (or any part thereof), for any reason whatsoever, at any time, and without notice to you, and you agree that Omachron Plastics Inc. will have no liability or obligation to you for any such termination, modification, suspension, or discontinuance. Your sole remedy in the event you object to any provision of this Agreement or become dissatisfied with this site, is to terminate this Agreement by ceasing to access and use this site.
Generally Applicable Terms
Jurisdiction, Choice of Law and Jury Trial Waiver
The Terms and Conditions (including the breach, termination and validity thereof), sales of our Products, use of the Omachron Plastics Properties, any personal information you submit to us and any disputes arising out of or relating to any of the foregoing (i) shall be governed entirely by and interpreted in accordance with the laws of the State of the United States or the Province of Canada and applicable U.S. or Canadian federal law as may be designated by Omachron Plastics Properties in its sole discretion, without giving effect to conflict of law principles of any jurisdiction, and (ii) shall not be governed in any manner by the United Nations Convention on Contracts for the International Sale of Goods, which is hereby expressly excluded, or the laws of any jurisdiction outside the United States. Except as otherwise expressly provided respecting the resolution of any controversy or claim between Omachron Plastics and a party domiciled outside the jurisdiction in which Omachron Plastic Products operates, you irrevocably consent to the exclusive jurisdiction of the courts located in the jurisdiction designated by Omachron Plastics Properties in connection with any action by or against Omachron Plastics to which you are a party. Proceedings to enforce the result of any such adjudication, however, may be brought in any applicable forum. TO THE FULLEST EXTENT PERMITTED BY LAW, WE BOTH KNOWINGLY AND VOLUNTARILY WAIVE TRIAL BY JURY IN ANY SUCH ACTION.
Resolution of International Disputes
Any controversy or claim between Omachron Plastics and a party domiciled outside the jurisdiction in which Omachron Plastic Products operates arising out of or relating to the Terms and Conditions, including but not limited to, the breach, termination or validity of the Terms and Conditions, sales of our Products, use of the Omachron Plastics Properties and any personal information submitted to us shall be determined and resolved exclusively by arbitration administered by the International Centre for Dispute Resolution in accordance with its International Arbitration Rules. In connection with any such arbitration, the place of the arbitration shall exclusively be determined by Omachron Plastic Products, the language of the arbitration shall be English, and the law of the State of the United States or the Province of Canada and applicable U.S. or Canadian federal law as may be designated by Omachron Plastics Properties in its sole discretion shall be applied to the dispute submitted to arbitration, without giving effect to any conflict of law principles of any jurisdiction. The arbitration award shall be final and binding, and judgment on the award may be entered and enforced in any court having jurisdiction over the parties. Except as may be required by law or for the purposes of entering, challenging or enforcing an arbitration award in a court having jurisdiction over the parties and subject matter, no party or its representatives may disclose the existence, content, or results of any arbitration hereunder, or any other matter relating to the arbitration or the award, without the prior written consent of all parties.
Force Majeure
We are not liable for any delay in or impairment of our performance caused in whole or in part by acts of God, labor disruptions, acts of war, terrorists, criminals, hackers or vandals, governmental decrees or controls, riots, epidemics and quarantines, communications disruptions, power failures, accidents, explosions, fires, inability to obtain or ship products, inability to obtain licenses or permits, shortages or inability to obtain supplies or raw materials, severe weather, natural disasters and catastrophic events, or any other occurrence which is beyond our reasonable control in the conduct of business.
Waiver
The failure (with or without intent) of any party to insist upon the strict performance by the other party of any provision of the Terms and Conditions shall not be deemed to constitute a modification of, or a waiver of the right to insist at any time thereafter upon performance strictly in accordance with, any of the provisions of the Terms and Conditions. No waiver of any provision of the Terms and Conditions shall operate as a waiver of any other provision of the Terms and Conditions, and no waiver of any provision of the Terms and Conditions shall operate as a continuing waiver of that provision.
Severability
In the event that any provision of the Terms and Conditions is held illegal, invalid or unenforceable for any reason, that illegality, invalidity or unenforceability shall not affect the remaining provisions of the Terms and Conditions, in which event they shall be construed and enforced as if that illegal, invalid or unenforceable provision had never been inserted in them.
Assignment; No Third Party Benefit
No benefits or duties under the Terms and Conditions may be assigned without our prior written consent, except that a merger or consolidation of any party with another entity shall not constitute a violation of this provision. The Terms and Conditions are intended for the sole and exclusive benefit of the parties thereto and their respective permitted assignees thereunder. Nothing in the Terms and Conditions shall give any other person any legal or equitable right, remedy or claim under or in respect of the matters covered in them.
Independent Relationship
Nothing provided in the Terms and Conditions shall be deemed to create any relationship between us of employment, partnership, joint venture, agency or representation with respect to the use of the Omachron Plastics Properties or sales of Products by us.